Dental Milling Blocks/Sintering Ovens
Milling Blocks
Dental Milling Blocks : Wax, PMMA, Zirconia, Chrome Cobalt and Titanium
Diameter for discs : 98mm / 98.5mm / 99mm
Thickness range : 10 mm / 12 mm / 14 mm / 16 mm / 18 mm / 20 mm / 22 mm / 25 mm
Indications : Coping, single crown, full contour crowns, long span bridges and implant abutment
Wax
Zirconia
Chrome Cobalt
Dental Milling Block
Titanium
Chamber Furnace for Sintering Translucent Zirconia
Due to its maximum temperature of 1650 °C, LHT 02/17 LB Speed is perfectly suited for sintering of translucent zirconia. The electrically driven lift-bottom provides for easy charging. The heating all around the cylindrical furnace chamber provides for a good temperature uniformly.

By using special heating elements made of molydenum disilicide, crowns and bridges are protected against chemical contamination at the best. The charge will be placed in saggars made of technical ceramics. Up to three saggars on top of each other guarantee high productivity.

Model LHT 02/17 LB Speed is additionally equipped with rapid cooling devices. The furnace automatically opens stepwise for faster cooling. Depending on the charge and the type of saggars process times shorter than two hours can be realized.